Heatmaster G series Outdoor Boilers

RSI Boilers - HeatMaster SS Authorized Dealer

Home
Outdoor Wood Boilers
Temperature Monitoring
Parts and Accessories
Installation
Nature's Comfort Site
Boiler Delivery

 

HeatMaster G200

MSRP $10,995
Check our specials for current discounts
Financing is available upon request

Our top selling gasification furnace, the G200 is a workhorse! Capable of supplying heat to a home and small shop or one large building. Ask us how the G200 can be put to work for you.

Firebox
(W” x L” x H”)

27 x 28 x 37

Firebox Door
(W” x H”)

20 x 20.5

Water Capacity
(US Gallons)

195

Approximate BTUs

210,000

Dimensions
(W” x L” x H”)

48 x 67 x 82

8 hour burn rate

111,315 BTU/hr

Emissions

.07lb/mmBTU

8 hour efficiency
(Lower heating value)

85.0%

8 hour efficiency
(Higher heating value)

79.0%

CO

NA


NCB-175 

Features include:

  • Smoke free loading – Stay clean and smoke free when loading your furnace.
  • Clean, low maintenance design – No brushing tubes, scraping creosote or shovelling ash. Load and clean your furnace in 5 minutes!
  • Approved for indoor and outdoor installation
  • Heatmasterss warranty – We stand behind every furnace we sell with a Lifetime Limited Workmanship and Corrosion Warranty.
  • Easy access hinged rear door – The insulated rear door is built with a unique hinge design which allows for easy access to the rear of the furnace and quick and easy removal of the door if required without the use of tools or hardware.
  • EPA Certified
  • Safe easy-to-use dual firebox door latch – Our carefully designed latch catches the door so it doesn’t swing completely open and expose the user to excessive heat.
  • Heavy duty multi-layer insulation
  • Powder coat finish

HeatmasterSS is proud of it’s reputation of producing innovative wood heating methods and our G Series wood furnaces are continuing that trend. They operate more efficiently with fewer emissions than other wood furnaces. They can use up to 50% less wood to create the same heat.

How does it do that?

Wood gas is generated in a high temperature reaction (>700° F) between the wood and a limited amount of oxygen. The heat and lack of oxygen “bakes” the wood, causing the gases in the wood to release in the form of carbon monoxide, hydrogen and carbon dioxide.

The wood gas mixture that is created in the firebox then gets forced through the base of the fire along with any ash that would come with it and burned at temperatures around 2000° F in the gasification chamber. This creates a very hot, very clean burn which helps you get the most out of your fuel. After the gas is burned, the heat is transferred to the water jacket using the heat exchange tubes. Normal exit temperatures of the exhaust are 200 – 300 F.
The most notable indicator of effective gasification is the lack of smoke exiting the chimney.
The gasification process creates longer burn times and can reduce wood consumption as much as 50% compared to a standard wood furnace.

What does it mean for you?

  • Less wood cutting
  • Less ash removal
  • Fewer emissions
  • Fewer trips to the furnace
  • Bottom line – more heat for less
Return to main page Return to NCB Boiler page


Please Contact us for more info or with any questions
Philip Howard / RSI
109 Commercial St / PO box 341
Arlington, WI 53911
608-438-8300

sales@rsiboilers.com